Guidance for reporting under the revised UK EMIR Article 9 reporting requirements.
On 24 February 2023, we published a joint Policy Statement (PS23/2) with the Bank of England (the Bank) confirming changes to the derivative reporting framework under UK EMIR.
The majority of the new requirements are applicable from 30 September 2024, with a transition period for some aspects.
You can read our guidance below on how the updated reporting framework will be implemented. This guidance is in the form of questions and answers (Q&As) grouped into topics. The Q&As are applicable from 30 September 2024 in line with the majority of the new requirements.
Who this is for
These Q&As will primarily be relevant for:
- counterparties in scope of the reporting requirements under UK EMIR
- trade repositories (TRs) registered, or recognised, under UK EMIR
- third party services providers who offer reporting services to counterparties subject to reporting under UK EMIR
- trade associations, law firms and consultancy firms who work with counterparties subject to reporting under UK EMIR
Questions and answers (Q&As)
Under Article 9 of UK EMIR, the Bank and the FCA (together, the Authorities) share responsibility for derivatives reporting. The Bank is responsible for central counterparties (CCPs) and the FCA is responsible for all other counterparties in addition to trade repositories (TRs). Any references to 'we', 'us' and 'our' in these Q&As should be read in this context.
The Q&As should be read in conjunction with the FCA/Bank of England Policy Statement (PS23/2) and the supporting documentation below (which are collectively referred to as the 'new requirements'):
- The FCA Standards Instrument containing:
- Technical Standards on the Minimum Details of the Data to be Reported to Trade Repositories 2023
- Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting 2023
- The technical specification documents:
- XML schemas under UK EMIR (applicable from 30 September 2024), together 'the XML Schemas'
- Incoming messages to TRs (ZIP 4.4MB)
- Outgoing messages from TRs (ZIP 8.3MB)
- UK EMIR Validation Rules (applicable from 30 September 2024)
- The European Market Infrastructure Regulation Rules (FCA EMIRR) for TRs
- XML schemas under UK EMIR (applicable from 30 September 2024), together 'the XML Schemas'
Please note that we've also updated the UK EMIR Validation Rules (applicable from 30 September 2024) to address errors or to close gaps which would have affected the ability of reporting counterparties to report accurate details of derivative contracts. Finalised changes have been marked in red within the document. We don’t intend to make further changes before 30 September 2024.
These Q&As apply in relation to the new requirements applicable from 30 September 2024. Reporting counterparties should take a pragmatic approach in considering the application of these new Q&As alongside any existing guidance, including circumstances where the new Q&As may supersede them. In due course, and as part of the programme of repealing and replacing assimilated law, we intend to review existing guidance and consider where it remains relevant.
1. Transitional arrangements
The new requirements come into effect on 30 September 2024.
From 30 September 2024 all newly entered or modified derivative trades at both trade and position level will need to comply with the new requirements.
For derivative trades entered into before 30 September 2024, there will be a 6-month transition period for entities responsible for reporting to update those outstanding derivative reports to the new requirements. This ends on 31 March 2025.
This set of Q&As relates to the arrangements for transitioning to the updated derivative reporting framework under UK EMIR during the period from 30 September 2024 to 31 March 2025.
1.1 How should derivative reports entered into before 30 September 2024, that have not been updated to comply with the new requirements at the conclusion of the transition period on 31 March 2025, be treated?
Our expectation is for all entities responsible for reporting to ensure any outstanding derivative reports are updated to comply with the new requirements by the end of the transitional period on 31 March 2025.
We will monitor progress during the 6-month transition period. We expect entities responsible for reporting to proactively engage with us ahead of the completion of the transition period, with explanation, if they are at risk of not updating their outstanding reports to comply with the new requirements after 31 March 2025. We may consider using our supervisory powers in a proportionate and risk-based manner in the event of firms failing to meet the new requirements.
1.2 Should TRs terminate any derivative reports entered into before 30 September 2024, that have not been updated to comply with the new requirements, at the conclusion of the transition period on 31 March 2025?
No. TRs should not unilaterally terminate outstanding derivative reports that have not been updated to comply with the new requirements after 31 March 2025.
TRs should take all reasonable steps to encourage entities responsible for reporting to ensure their outstanding derivative reports are updated to comply with the new requirements by the end of the transition period. However, it is the responsibility of entities responsible for reporting to ensure all outstanding derivative reports comply with the new requirements by the end of the transitional period on 31 March 2025.
We will monitor progress during the 6-month transition period. We expect entities responsible for reporting to engage with us, with explanation, if they are at risk of not being able to update their outstanding reports to comply with the new requirements after 31 March 2025. We may consider using our supervisory powers in a proportionate and risk-based manner where firms fail to comply with the new requirements.
1.3 Will outstanding derivative reports, that have not been updated to comply with the new requirements, be subject to reconciliation during the transition period?
Yes. TRs should include all outstanding derivative reports in the reconciliation process (see Section 2 Reconciliation for further detail on the reconciliation process) regardless of whether they have been updated to comply with the new requirements or not. Reconciliations should be based on the new requirements only. Only fields required to be reconciled under the new requirements should be subject to reconciliation. Fields that are no longer required under the new requirements do not need to be reconciled.
We are aware this approach will result in reconciliation breaks during the 6-month transition period, particularly where one counterparty reporting a trade may have updated a report to comply with the new requirements, but the other counterparty, reporting the same transaction, has not. However, we expect this to be a short-term issue, which will reduce as more reporting counterparties update their reports to comply with the new requirements. We will monitor progress during the 6-month transition period.
1.4 Should TRs maintain the reconciliation status of an outstanding derivative report after it has been updated to comply with the new requirements?
No. The reconciliation status of outstanding derivative reports should be based on the most recent reconciliation. All reports subject to reconciliation should be included in the reconciliation process, regardless of whether they have been updated to comply with the new requirements. Once a report is updated to comply with the new requirements, a new reconciliation should take place.
We are aware this approach will result in reconciliation breaks during the 6-month transition period, particularly where one counterparty reporting a trade may have updated a report to comply with the new requirements, but the other counterparty, reporting the same transaction, has not. However, we expect this to be a short-term issue during the transition period.
This will provide a more accurate view of reconciliation for Authorities.
1.5 How should counterparties reporting at position level ensure outstanding reports are updated to comply with the new requirements, and which action/event type should be used in such circumstances?
Trade level derivatives that are included in a position are not outstanding and therefore do not need to be re-reported and updated to comply with the new requirements. Only the corresponding derivative at position level needs to be updated to comply with the new requirements, provided it is outstanding on 30 September 2024.
As with other outstanding reports, outstanding position level reports should be updated to comply with the new requirements with the action type 'Modify' and event type 'Update' before the conclusion of the transition period. However, this will not be necessary where counterparties have corrected or modified an outstanding report with the action type 'Modify' or 'Correct', since doing so will require updating the report to comply with the new requirements. Counterparties must ensure that outstanding position level reports that have not been modified or corrected during the transition period, regardless of whether daily valuation and collateral updates are being reported, are updated with the action type 'Modify' and the event type 'Update' since the daily valuation and collateral updates will not include details for every field.
Counterparties should keep in mind acceptable action and event type combinations when reporting at position level. See also Section 5 Actions and Events.
1.6 Do the XML schemas for TRs to Authorities allow for the reporting of derivatives that have not been updated to comply with the new requirements?
Yes. We have provided a full suite of XML Schemas for reporting from 30 September 2024 onwards.
This includes 'relaxed' XML schema for the Trade State Report, Margin Derivative State Report, and Reconciliation Statistics Report. These permit TRs to submit details of all derivative reports, regardless of whether they have been updated to comply with the new requirements during the 6-month transition period. That is both those derivatives trades entered into or modified on or after 30 September 2024 that are subject to the new requirements, and those derivative trades entered into before 30 September 2024 that have not yet been updated to meet the new requirements.
Trade Activity, Margin Derivative Activity, Rejection Statistics, and Warning Statistics files must only include reports that have been updated to comply with the new requirements due to the ‘strict’ XML schemas that are in place for these files.
1.7 In reports to the Authorities, should TRs make available details of derivative reports that have and have not been updated to comply with the new requirements?
Yes. TRs should include all derivatives reported by counterparties in the reports made available to Authorities, regardless of whether they have been updated to comply with the new requirements or not, and where the relaxed schemas allow them to do so. See our response to question 1.6.
1.8 Do the XML Schemas for TRs to other TRs and reporting counterparties allow for reporting of derivatives that have not been updated to comply with the new requirements?
Yes, for certain types of reports where there is a ‘relaxed’ XML schema that can accommodate derivative reports not updated to comply with the new requirements.
Specifically, the Trade State Report, Margin Derivative State Report, and Reconciliation Statistics Report files can include updated and non-updated contracts due to the relaxed schemas for these files. That is both those derivatives trades entered into or modified on or after 30 September 2024 that are subject to the new requirements, and those derivative trades entered into before 30 September 2024 that have not yet been updated to meet the new requirements.
Trade Activity, Margin Derivative Activity, Rejection Statistics, and Warning Statistics files must only include updated reports that comply with the new requirements due to the 'strict' XML schemas that are in place for these files.
1.9 In reports to other TRs and reporting counterparties, should TRs make available details of derivative reports that have and have not been updated to comply with the new requirements?
Yes. TRs should include all derivative reports in the reports made available to other TRs and entities responsible for reporting, regardless of whether they have been updated to comply with the new requirements, where the type of report being shared permits this due to the 'relaxed' XML schemas. See our response to question 1.8.
1.10 Will the ‘relaxed’ XML schemas be available after 31 March 2025?
No. Our expectation is that from 31 March 2025, all XML schemas will be 'strict'. That is, they will only allow reports consistent with the new requirements to be reported. See also questions 1.1 and 1.2.
1.11 Will it be possible for outstanding derivative reports to be ported during the transition period?
Yes, outstanding derivative reports can be ported during the transition period. However, from 30 September 2024, any outstanding derivative reports that require porting must have been updated to comply with the new requirements. It will not be possible to port outstanding reports that have not been updated, as the relevant XML schema will only permit the sharing of updated records which comply with the new requirements between TRs.
In the event a reporting counterparty wishes to move TR during the transition period, the reporting counterparty should ensure any outstanding derivative reports are updated to comply with the new requirements before porting to a new TR. Reporting counterparties should keep this in mind when developing and implementing plans to ensure outstanding reports comply with the new requirements as it may impact reporting arrangements, for example, where firms use delegated reporting arrangements.
1.12 Which combination of action type and event type field values should be used when updating an outstanding derivative report to comply with the new requirements? What combination is suitable when additional details are subsequently added to meet the new requirements after a report has been initially updated?
When outstanding derivative reports (trades and positions that are still outstanding after 30 September 2024) are updated to comply with the new requirements, reporting counterparties should use action type 'Modify' and event type 'Update'. The same action and event types ('Modify' and 'Update') should also be used for any new values that are added to an outstanding position or trade to comply with the new requirements.
We expect that a transaction or position will be updated once only.
Any corrections to reports that have previously been updated to meet the new requirements should be done with action type 'Correction'.
We do not expect there to be any Modify/Update reports after the transition period, as we expect all outstanding positions and trades to comply with the new requirements after that period.
2. Reconciliations
This set of Q&As relates to processes for reconciling data between TRs. TRs are required to establish procedures and policies to ensure the effective reconciliation of data between TRs, and improve data quality under the FCA’s EMIRR.
Entities responsible for reporting are also required to have arrangements in place to ensure reconciliation breaks are resolved as soon as practicably possible (see Article 10 (3) of Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting 2023).
2.1 How should reconciliations be performed for derivatives with 2 legs, such as interest rate swaps, where counterparties agree bilaterally on the sequencing of the legs?
TRs should reconcile derivatives with 2 legs by reconciling each of the legs as reported by the counterparties. In most cases, including interest rate swaps, the 2 legs of a derivatives trade are not sequenced in a particular order. Accordingly, TRs should match the two legs using the values in the Direction of Leg 1 field (Table 1, Item 18) with the opposite value, regardless of the order in which the legs were reported. This is in line with the reconciliation 'Conditions' detailed in the UK EMIR Validation Rules (applicable from 30 September 2024) ('Reconciliation Information', Column J).
2.2 How often should TRs perform reconciliations?
As set out in PS23/2, our expectation is for TRs to conduct reconciliations based on the latest reported value for each of the fields in Tables 1 and 2 of the Annex to the EMIR Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting 2023 as of the previous working day.
2.3 What information should TRs provide entities responsible for reporting to support the identification of reconciliation breaks, and in what format should information on reconciliation breaks be provided?
As set out in PS23/2, TRs are required to provide the results of the reconciliation process to entities responsible for reporting for each working day. This should allow entities responsible for reporting to easily identify and remediate reconciliation breaks.
In terms of the format in which this information should be shared, TRs shall provide the results of the reconciliation process in an XML format and a template developed in accordance with the ISO 20022 methodology (available on the FCA’s UK EMIR Reporting obligation webpage). This should include information on the fields that have not been reconciled. However, we do not oppose TRs sending reports in other formats in addition to XML. TRs may take this decision individually based on the needs and requirements of their respective client base.
2.4 How should counterparties remediate reconciliation breaks?
Entities responsible for reporting are required to have arrangements in place to ensure the remediation of reconciliation breaks as soon as practically possible. As the nature and severity of reconciliation breaks will vary, we do not intend to provide prescriptive guidance as to when and how counterparties should remediate breaks. However, the expectation is that entities responsible for reporting have arrangements to remediate reconciliation breaks that are appropriate to the nature, scale, and complexity of their business.
2.5 What are the requirements for the operational elements of inter-TR reconciliation?
TRs must comply with the rules outlined in Section 2.3 of the FCA’s EMIRR relating to inter-TR reconciliation. TRs should have the flexibility to agree, between them, the best way in which they can meet the requirements in EMIRR 2.3 from an operational perspective. As such, we do not intend to provide more prescriptive guidance for TRs in this area at this time. However, we will continue to monitor the effectiveness of the inter-TR reconciliation process to determine whether further guidance may be needed.
2.6 Can reconciliation reports differentiate between situations where a valuation has never been reported (‘missing’ valuations) and those in which a valuation has not been reported for at least 14 days (‘late’ valuations)?
No. Reconciliation reports do not distinguish between whether valuation updates are 'missing' or 'late'.
However, it is possible under the Warnings XML schema to distinguish between ‘missing’ valuations and ‘late’ valuations. As part of their end-of-day response mechanisms, TRs are required under section 2.4.1 of the FCA’s EMIRR to provide reporting counterparties with the outstanding derivative reports for which no valuation information has been reported, or the valuation information that was reported is dated more than 14 calendar days from the day for which the report was generated.
2.7 Which fields are subject to reconciliation and reconciliation tolerance levels?
Details of the reportable fields that are subject to reconciliation and the applicable reconciliation tolerance levels, can be found in the UK EMIR Validation Rules (applicable from 30 September 2024) ('Reconciliation Information' sheet, Columns H-J).
3. Errors and omissions
Article 3 of the Technical Standards on the Minimum Details of the Data to be Reported to Trade Repositories 2023 requires reports to TRs to be complete and accurate. This set of Q&As relates to the process for how counterparties should approach any errors and/or omissions with their UK EMIR reporting.
3.1 What approach should entities responsible for reporting take when correcting errors and omissions in historic reports?
Entities with an obligation to report the details of derivative trades under Article 9 of UK EMIR are required to ensure that such details are complete, accurate and reported on time.
Entities responsible for reporting are expected to remediate all errors and omissions to their reports. This includes both live and matured trades regardless of age and any impacted position reports.
However, where remediation may be large and complex, entities responsible for reporting should engage bilaterally with the relevant Authority to agree a remediation plan that is proportionate to the complexity of the error and/or omission that requires remediation.
Where any material errors or omissions are identified, entities responsible for reporting must notify the relevant Authority as soon as practicably possible.
- CCPs should notify the Bank of England by completing the Errors and Omissions form available on its website.
- All other reporting counterparties should notify the FCA by completing the Errors and Omissions form available on its website.
Whereas completion of the form can be performed by any party, it is the responsibility of the counterparty in scope of UK EMIR Article 9 reporting requirement who should submit the notification to the relevant Authority.
3.2 What arrangements should entities responsible for reporting have in place to identify errors and omissions in their reported data?
At a minimum, we expect entities responsible for reporting to have systems and controls in place to ensure timely and complete reporting in accordance with Article 9 of UK EMIR.
In addition, entities responsible for reporting should ensure they have in place:
- effective governance to oversee their UK EMIR reporting
- effective systems and controls to identify and remediate errors and omissions (including the notification of any errors and omissions to the relevant Authority); and
- arrangements with counterparties to address reconciliation breaks
Entities responsible for reporting should assess the materiality of any errors or omissions in their UK EMIR reporting (including identification of any errors and omissions that are to be reported to the relevant Authority) based on the size, nature, and complexity of their business.
3.3 How should entities responsible for reporting use the information in the reconciliation reports they receive from TRs?
Entities responsible for reporting should use reconciliation reports received from TRs to validate the contents of their reports with their counterparties. All entities responsible for reporting should have arrangements in place with their counterparties to ensure any reconciliation breaks are appropriately resolved as soon as practicably possible.
The severity and drivers of reconciliation breaks will differ. As such, more prescriptive timelines within which entities should remediate breaks would not be appropriate for the remediation of certain reconciliation breaks.
3.4 What is the status of reports included in the Warnings Feedback message provided by TRs? How should entities responsible for reporting use the Warnings Feedback message?
The Warnings Feedback message provided by TRs to entities responsible for reporting is to identify missing data and potential outlier values without rejecting the reports, and to help reporting counterparties identify and remediate possible errors and omissions within reported data. The reports included within the Warnings Feedback message have been accepted by the TR which is reflected in its status (Acknowledged or ACK).
Entities responsible for reporting should use the information provided in the Warnings Feedback message to monitor the accuracy of their reporting by investigating the potential issues. They should then confirm if remediation is required to correct any errors or omissions without undue delay to comply with Article 9 UK EMIR, including by submitting an Errors and Omissions form on the appropriate Authority’s website where necessary.
3.5 What are the thresholds used to identify outlier values?
In accordance with the provisions of Section 2.4 of the FCA’s EMIRR, TRs will be required to notify entities responsible for reporting of any reports where the notional amount exceeds a threshold for that class of derivative as part of the Warning Feedback message. The intention of having thresholds to identify outlier values is to identify possible erroneous reporting of notional amounts in a particular asset class that would materially affect the Authorities' view of the largest exposures in a particular asset class.
To achieve this outcome, the Authorities propose to co-ordinate with UK TRs to implement a set of thresholds to make the Warnings Feedback message a useful and consistent data quality metric for both industry and the Authorities. We will request that TRs make these thresholds available to clients in an easily accessible manner once they have been established.
The Authorities will continue to monitor the introduction of the Warnings Feedback message, including the ongoing effectiveness of the thresholds set.
3.6 How should derivatives reported under the old requirements, and subsequently need to be revived, be reported?
Where a reporting counterparty uses the Revive action type to reopen a report that has not been updated to comply with the new requirements, for example to correct errors in matured trades, the reporting counterparty should provide all relevant details to update the report to comply with the requirements as of the date of the revival action. This is the same approach as for any revived report.
Counterparties are expected to provide all the relevant data to update revived reports so they comply with the new requirements. But if this is not possible, counterparties are expected to proactively engage with us, with an explanation and a proposed solution.
4. Derivative identifiers
Amendments to the UK EMIR reporting framework introduces new requirements for the use of Unique Product Identifiers (UPIs) and updated requirements relating to Unique Transaction Identifiers (UTIs) and Legal Entity Identifiers (LEIs). This set of Q&As gives further guidance on how these identifiers should be reported.
4.1 Should pre-existing UTIs be modified?
No. In line with the UK EMIR Validation Rules (applicable from 30 September 2024), UTIs should not be amended once they have been reported.
As set out in CP21/31, we are not expecting the generation of new UTIs for outstanding trades and positions and the UK EMIR Validation Rules (applicable from 30 September 2024) permit the use of old format UTIs to reflect this. UTIs allocated to a trade or position should remain the same throughout the lifetime of the trade or position and a new UTI should be used only if a trade or position is replaced by one or more trades or positions, for example following a post trade risk reduction (PTRR) event. Therefore, TRs should reject any modifications to pre-existing UTIs.
4.2 How should UTIs be treated when they are generated by non-UK counterparties under different reporting requirements?
The updated UTI structure in UK EMIR is based on CPMI-IOSCO Technical Guidance on the Harmonisation of the Unique Transaction Identifier. UTIs generated by non-UK counterparties pursuant to a different reporting regime should align with the formatting requirements under UK EMIR, meaning they can be treated in the same manner as UTIs generated under UK EMIR.
Noting there may be differences in implementation timelines for the updated UTI structure between jurisdictions which may present issues, we will monitor progress and consider if further guidance is necessary.
4.3 Should UTIs generated by trading venues incorporate the existing trading venue transaction identification code (TVTIC) as reported under UK MiFIR?
There is no requirement for UTIs generated by trading venues to incorporate the trading venue’s TVTIC into the UTI. In line with Article 8 of the Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting 2023, UTIs must be composed of the LEI for the counterparty who generated the UTI, followed by a code of up to 32 characters which should be unique at the level of the generating entity.
While a trading venue’s TVTIC can’t be used in place of a UTI, there is nothing to prevent trading venues from incorporating an existing TVTIC into the UTIs it generates, provided the UTIs continue to meet the requirements in Article 8 of the Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting 2023.
4.4 When should International Securities Identification Numbers (ISINs), UPIs and Classification of Financial Instrument (CFI) codes be used in combination?
Article 7 of the Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting 2023, requires derivatives to be identified with an ISIN where the derivative is either:
- admitted to trading or traded on a trading venue; or
- traded on a systematic internaliser (SI) and the underlying is admitted to trading or traded on a trading venue or an index or basket composed of instruments traded on a trading venue
Where a derivative does not meet one of these conditions it should be identified with a UPI, regardless of whether the derivative has an ISIN. Accordingly, ISINs and UPIs should not be used in combination, and the UK EMIR Validation Rules (applicable from 30 September 2024) will not permit the reporting of a UPI where an ISIN is provided.
CFI codes should be provided where possible for all derivatives in addition to an ISIN or UPI, depending on whether it is admitted to trading or traded on a trading venue or SI.
4.5 What should be used if an ISIN does not exist for a derivative traded on a third country organised trading platform?
A product identifier is not required to be reported for derivatives executed on a third country organised trading platform if neither an ISIN nor a UPI exist.
4.6 Should fields which overlap with UPI reference data be reported?
Yes. Entities responsible for reporting must report all the applicable fields specified in the Technical Standards on the Minimum Details of the Data to be Reported to Trade Repositories 2023, including those which overlap with UPI reference data.
However, we will continue to monitor the implementation of the UPI system under the UK regime and will communicate any developments accordingly.
4.7 Are TRs required to enrich reports with data derived from the UPI database?
No. TRs are not required to enrich reports as entities responsible for reporting must continue to report fields which overlap with UPI reference data.
However, we will continue to monitor the implementation of the UPI system under the UK regime and will communicate any developments accordingly.
4.8 Are entities responsible for reporting required to ensure the LEI of their counterparty has not lapsed?
No, except in the case of mandatory delegated reporting.
Article 4 of the Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting 2023, requires entities responsible for reporting to ensure the reference data related to their LEI is renewed in accordance with the terms of any of the accredited Local Operating Units of the Global LEI System.
For mandatory delegated reporting, the non-financial counterparty (NFC) is responsible for renewing and maintaining its LEI, as explained in PS23/2. But as required under Article 10 of the Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting 2023, financial counterparties must have in place arrangements for due renewals by the NFC of its LEI to ensure accurate reporting for which the FC is solely responsible and legally liable.
Accordingly, the UK EMIR Validation Rules (applicable from 30 September 2024) require the LEI status of Counterparty 1 (Table 1, Item 4) and the Entity responsible for reporting (Table 1, Item 3) to be Issued, Pending transfer or Pending archival for certain action types. However, for Counterparty 2 (Table 1, Item 9) the LEI status may be Lapsed for certain action types. The Validation Rules provide further details as to what LEI status is required for the different action types.
4.9 Should TRs validate LEIs against the Global LEI Foundation (GLEIF) database based on the Reporting Timestamp field (Table 1, Item 1)?
Yes. TRs should, where applicable, validate LEIs against the GLEIF database as of the date reported in the Reporting Timestamp field.
4.10 How should the Prior UTI field (Table 2, Item 3) be populated by the stepping-in counterparty when it engages in a step-in trade and the prior UTI is not available when reporting?
The stepping-in counterparty is expected to make reasonable efforts to populate the Prior UTI field. Where this is not possible the field may initially be populated with the code 'NOTAVAILABLE', and then amended with the correct Prior UTI value as soon as practicable once it is available. In this circumstance there is no requirement to resubmit previous reports to retrospectively include the Prior UTI.
4.11 How should the post-trade risk reduction identifier (PTRR ID) used to populate the PTRR ID field (Table 2, Item 5) be generated?
The PTRR ID is made up of the LEI of the provider (PTRR service provider or a CCP providing the PTRR service) followed by up to 32 alphanumeric characters that uniquely identify the PTRR event. The PTRR ID should be generated by that same provider. All derivatives directly resulting from, or terminated because of, a given PTRR event, should be reported with the same PTRR ID.
4.12 How should the Report Tracking Number field (Table 2, Item 2) be populated if a Report Tracking Number (RTN) is not available when reporting?
Where a RTN is not available at the time of reporting, entities responsible for reporting may populate the Report Tracking Number field (Table 2, Item 2) with 'RTNNotProvided' but this field should be updated with the RTN as soon as practicable once it becomes available. In this circumstance there is no requirement to resubmit previous reports to retrospectively include the RTN.
As specified in Table 2 of the Annex to the Technical Standards on the Standards, Formats, Frequency and Methods and Arrangements for Reporting, counterparties are required to report RTNs for derivatives executed on trading venues. The Technical Standards define the RTN as 'a number generated by a trading venue unique to that execution'. Our expectation is accordingly for trading venues who generate RTNs to make the RTN available in a timely manner so entities responsible for reporting can meet their UK EMIR reporting obligations. Similarly, where applicable, our expectation is for intermediaries to make the RTN available to their counterparties so they can meet their UK EMIR reporting obligations.
4.13 Should the Report Tracking Number (Table 2, Item 2) field be populated for derivatives executed on third country organised trading platforms?
No. The UK EMIR Validations Rules (applicable from 30 September 2024) only require a RTN for derivatives executed on UK trading venues and do not permit the reporting of RTNs for derivatives not executed on UK trading venues.
5. Actions and Events
The combination of Action Type and Event Type clarifies the reasons why a report is made (eg a new trade, an early termination, a modification due to a step-in event). The new requirements introduce a new action type, 'Revive', which can be used when re-opening a derivative at trade or position level. This set of Q&As provides further guidance on how action types and events should be reported consistently.
5.1 Does the new Event Date field (Table 2, Item 153) impact how TRs should validate reports depending on action type?
Yes. The new Event Date field will impact TR validation of reports, dependent on which action type is reported.
For details on how the Event Date is limited depending on action type, see the UK EMIR Validation Rules (applicable from 30 September 2024) where we detail our expectations in the 'Trade validations auth.030' sheet in Table 2, Item 153 Validation Rules.
5.2 How does the new Event Date field (Table 2, Item 153) affect how TRs validate records?
The Event Date field affects several TR validation steps. Primarily, it is used in conjunction with the Reporting Timestamp field (Table 1, Item 1) to validate the order of incoming submissions. The Event Date field is also used to determine whether the LEI status of various parties to a trade needs to be validated and, in instances where the Valuation Timestamp (Table 2, Item 23) field is populated, it should match the Event Date field.
For full details on how the Event Date field restricts other fields, see the UK EMIR Validation Rules (applicable from 30 September 2024) where we detail our expectations in the 'Trade validations auth.030' sheet and the 'Margins validations auth.108' sheet.
5.3 What should be reported when a transaction that has been included in a position is identified as incorrect?
In this scenario, correction reports should be submitted for both the original (terminated) transaction and any impacted position reports. The transaction should not be revived.
Figure 5.1 illustrates a scenario where a transaction is reported incorrectly and subsequently compressed into a position.
5.4 How can action type be used to get the latest state of a derivative trade?
There are 4 states (Not reported, Outstanding, Terminated and Errored). The state of a derivative contract resulting from an action depends on the latest action and the previous state.
Figure 5.2 illustrates how the action type and the previous state determine the current state of a derivative contract.
This diagram has been drafted using material downloaded from the European Securities and Markets Authority’s (ESMA's) website. ESMA does not endorse this publication and is in no way liable for copyright or other intellectual property rights infringements, nor for any damages caused to third parties through this publication.
5.6 What are the possible combinations of action and event type?
The possible combinations of action and event type, and when they can be used, are described in Table 5.1 below.
Table 5.1 Applicability of Action type – Event type combinations
Action type | Event type | Applicability | Comments |
---|---|---|---|
New | Trade |
When a derivative with a new UTI is created for the first time through a trade, and not because of another prior event. |
Combination ‘New’-‘Clearing’ should be used for the new derivatives resulting from clearing, in particular for derivatives traded on trading venues and cleared on the same day by a CCP. |
New | Step-in |
When a derivative or position with a new UTI is created for the first time due to a step-in event. |
|
New | PTRR | When a derivative with a new UTI is created for the first time due to a PTRR event. |
Combination ‘New’-‘PTRR’ at position level is not applicable, as any derivative newly created due to a PTRR event is expected to be reported at trade level (without prejudice to the possibility of including such derivative subsequently in a position). Combination ‘New’-‘PTRR’ can be used in case of rebalancing. |
New | Clearing | When a derivative with a new UTI is created for the first time due to a Clearing event. | This combination also includes a clearing of OTC derivatives which were previously bilaterally agreed among counterparties and subsequently cleared. |
New | Exercise | When a derivative with a new UTI is created for the first time due to an Exercise event. | This combination should be used when reporting the underlying swap following the execution of a swaption. |
New | Allocation | When a derivative with a new UTI is created for the first time due to an Allocation event. | |
New | Inclusion in position | When a new position is created by inclusion of trades in that position for the first time. | |
New |
Corporate Event |
When a derivative or position with a new UTI is created for the first time due to a corporate action on the underlying equity. | |
Modify | Trade | When a derivative or position with an existing UTI is modified due to renegotiation of the terms of the trade, because of the changes to the terms of the trade agreed upfront in the contract (except for when such changes are already reported eg notional schedule) or because previously not available data elements become available. | |
Modify | Step-in | When a derivative or position with an existing UTI is modified due to a Step-in event. |
This combination includes also a transfer of a derivative at trade or position level from one CCP to another. |
Modify | PTRR | When a derivative or position with an existing UTI is modified due to a PTRR event. |
Combination ‘Modify’-‘PTRR’ at position level should only be used in the case where CCP positions are subject to PTRR (rather than bilateral netting and subsequent reporting at position level). Combination ‘Modify’-‘PTRR’ can be used in the case of compression. |
Modify | Early termination | When a derivative or position with an existing UTI is modified due to an early termination agreed in advance or due to a partial termination. | In the case of an early termination agreed in advance, the counterparties should update the maturity date. In the case of partial early termination, the counterparties should update the notional. |
Modify | Exercise | When a derivative or position, is amended due to the exercise of an option or swaption. | |
Modify | Allocation |
When a derivative with an existing UTI is partially allocated. This is used to report the amended notional of the existing derivative. |
|
Modify | Credit event | When a derivative or position with an existing UTI is modified due to a Credit event. | |
Modify | Inclusion in position | When a position with an existing UTI is modified because of inclusion of a new trade. | |
Modify |
Corporate Event |
When a derivative or position with an existing UTI is modified due to a corporate action on the underlying equity. | |
Modify | Update | When a derivative or position that is outstanding on the reporting start date is updated in order to conform with the amended reporting requirements. | |
Modify | No event type required | When a position with an existing UTI is modified due to more than one type of business events that occurred intraday. | Intraday reporting is not mandatory for ETDs, consequently counterparties are allowed to report ‘Modify’ at position level without indicating the event type, where such modification is a result of more than one type of business events that occurred intraday. |
Correct | No event type required | When a derivative or position with an existing UTI, or the data related to the collateral, is corrected because of an earlier submission of incorrect information. | |
Terminate | Step-in | When a derivative or position with an existing UTI is terminated due to a step-in event. This is used for terminating the old UTI post step-in. | |
Terminate | PTRR |
When a derivative or position with an existing UTI is terminated due to a PTRR event. This is used for terminating the old UTI(s) after PTRR operation. |
Combination ‘Modify’-‘PTRR’ can be used in the case of compression. |
Terminate | Early termination | When a derivative or position with an existing UTI is terminated due to an early termination (and when no other cause/event is known as the reason for that termination). | |
Terminate | Clearing | When a derivative with an existing UTI is terminated due to a Clearing event. This is used for terminating alpha trades. |
In the case of OTC derivatives concluded bilaterally, counterparties need to terminate the previously reported bilateral trades (with combination ‘Terminate’-‘Clearing’) and report the new cleared trades (with combination ‘New’-‘Clearing’). This also includes a scenario where existing derivatives become eligible for clearing at a later stage. |
Terminate | Exercise | When a derivative with an existing UTI is terminated due to an exercise event. For example, this is used for terminating options/swaptions when these are being exercised. |
‘Terminate’-‘Exercise’ should not be reported when the option is exercised on the maturity date. More generally, only terminations that take place at a date prior to the maturity date should be reported. |
Terminate | Allocation | When a derivative with an existing UTI is terminated due to an allocation event. This is used for terminating the old UTI post allocation. | |
Terminate | Credit event | When a derivative or position with an existing UTI is terminated due to a Credit event. | This combination should be reported when a Credit event leads to termination and settlement of the derivatives, eg single name CDS. |
Terminate | Inclusion in position | When a derivative or position with an existing UTI is terminated due to inclusion in a position. | A derivative at trade level that is immediately included into a position, should be reported with action type ‘Position component’. Only when a derivative is included in the position after being reported with action type ‘New’, it should be reported with action type ‘Terminate’ and event type ‘Inclusion in position’. |
Terminate |
Corporate Event |
When a derivative or position with an existing UTI is terminated due to a corporate action on the underlying equity. | |
Error | No event type required | When a derivative or position with an existing UTI is cancelled due to an earlier submission of incorrect information. For example, this is used to cancel the UTI of a derivative or position that should not have been reported (eg it is not a derivative transaction) or to cancel outstanding derivatives when the counterparty starts to benefit from an intragroup exemption. | |
Revive | No event type required |
When a derivative or position that has been cancelled is reinstated due to an earlier submission of incorrect information. For example, this is used to reinstate the UTI of a derivative or position that has been erroneously terminated. |
This action type should not be used to reopen a position that was previously netted and terminated. ‘Revive’ should only be used to reopen the trades that were terminated or cancelled by mistake or which were cancelled due to IGT exemption, so that the counterparties do not need to regenerate a new UTI. It should not be used for other reporting scenarios. In particular in the case of netted position, the counterparties need to decide if they maintain the position open (and report the valuation accordingly) or they close the position. If the counterparties close the position and then they enter into another derivative contract of the same type, and want to report at position level, they need to report a new position with a new UTI. |
Valuation |
No event type required |
When data related to the valuation are submitted for a derivative or position with an existing UTI. | |
Margin update |
No event type required |
When data related to the collateral are submitted for a derivative or position with an existing UTI. | |
Position component |
No event type required |
When a new derivative is concluded and included in a position on the same day. |
This table has been drafted using material downloaded from the European Securities and Markets Authority (ESMA’s) website. ESMA does not endorse this publication and is in no way liable for copyright or other intellectual property rights infringements, nor for any damages caused to third parties through this publication.
5.7 When should equity resets be reported?
Where an equity reset results in a change in reportable properties, for example, a notional increase or decrease, it should be reported. Where an equity reset does not result in a change in reportable properties, it should not be reported.
The Price field (Table 2, Item 48) should not change in an equity reset, as this is populated with the initial price of the underlying at the time of execution for equity swaps.
6. Venues
Entities responsible for reporting are required to report the venue where a derivative was executed in the Venue of Execution field (Table 2, Item 41). This set of Q&As provides guidance on how to accurately report the venue where a derivative was executed.
6.1 How should derivatives executed on third country organised trading platforms be reported?
In line with the definition of an OTC derivative in Article 2 of UK EMIR, derivatives executed on third country organised trading platforms should be considered OTC derivatives and reported as such unless the third country organised trading platform is considered as equivalent to a UK Regulated Market (see the list of equivalent third country markets maintained by the FCA).
Derivatives executed on third country markets considered as equivalent to a UK Regulated Market (pursuant to Article 2a of UK EMIR) should be reported as exchange traded derivatives.
6.2 Is there a machine-readable list of UK trading venues and equivalent third country markets?
Not at present.
A list of Multilateral Trading Facilities (MTFs) and Organised Trading Facilities (OTFs) authorised by the FCA along with Systematic Internalisers notified to the FCA is available on the FCA’s MTF, OTF and SI Register.
A list of UK Regulated Markets is also available on the Financial Services Register and a list of third country markets considered as equivalent to a UK Regulated Market is available on the FCA website.
6.3 Should the Venue of Execution field (Table 2, Item 41) be populated when reporting at position level?
Yes. As specified in the UK EMIR Validations Rules (applicable from 30 September 2024), this field is mandatory when reporting at both transaction and position level. For details of how to populate this field when reporting at position level see question 6.4.
6.4 How should the Venue of Execution field (Table 2, Item 41) be populated when reporting at position level?
When reporting at position level, the Venue of Execution field should contain the Market Identifier Code (MIC) of the venue (or XXXX or XOFF where applicable) where the greatest number of derivative contracts making up the position were executed.
6.5 Should the Venue of Execution field (Table 2, Item 41) be populated with a venue’s operating or segment Market Identifier Code (MIC)?
As specified in Table 2 of the Annex of the Technical Standards on the Minimum Details of the Data to be Reported to Trade Repositories 2023, the Venue of Execution field (Table 2, Item 41) should be populated with the venue of execution’s ISO 10383 segment MIC. If a segment MIC does not exist, the operating MIC should be reported.
Operating and segment MICs are both enabled by the UK EMIR Validations Rules (applicable from 30 September 2024) to populate the Venue of Execution field, provided they are included in the list maintained and updated by ISO (column 'MIC' in the worksheet 'ISO10383_MIC_NewFormat').
6.6 How should the Venue of Execution field (Table 2, Item 41) be populated for derivatives executed pursuant to the rules of a venue but not executed on that venue?
Where derivatives are executed pursuant to the rules of a venue but not executed on the venue, for example block trades executed outside the trading platform of a Regulated Market but executed pursuant to the rules of that Regulated Market, the Venue of Execution field should be populated with the MIC for the venue whose rules the derivative has been executed pursuant to.
This applies to both UK trading venues and third country organised trading platforms.
6.7 Should new derivatives resulting from clearing (the beta and gamma trades) retain the original venue of execution (alpha trade)?
Yes. Derivatives resulting from clearing should be reported with the original derivative’s venue of execution (or XXXX or XOFF where applicable).
6.8 Should new derivatives resulting from post-trade risk reduction (PTRR) events, such as portfolio compressions, retain the original venue of execution?
No. New derivatives resulting from PTRR events, such as portfolio compressions, should be reported with the code XXXX or XOFF (as applicable) to reflect they were not executed on a trading venue, SI or third country organised trading platform.
7. Exchange Traded Derivatives (ETDs)
This section contains Q&As providing guidance on how to accurately report various fields for ETDs.
7.1 How should the Execution Timestamp field (Table 2, Item 42) be populated for ETDs?
The Execution Timestamp field should contain the date and time a derivative was originally executed, resulting in the generation of a new Unique Transaction Identifier (UTI).
When reporting at position level, the Execution Timestamp field should refer to the time when a position was opened for the first time using the earliest execution timestamp of the trades making up a position.
7.2 How should the Report Submitting Entity ID field (Table 1, Item 2) be populated for ETDs where a counterparty chooses to report on its own behalf rather than delegating the reporting?
In the case of ETDs where a counterparty chooses to report on its own behalf rather than delegate the submission of the report to a third party, the Report Submitting Entity ID field should contain the counterparty's own LEI as the report submitting entity. The Entity Responsible for Reporting field (Table 1, Item 3) not being applicable to ETDs does not impact how the Report Submitting Entity ID field should be populated.
7.3 How should the Effective Date field (Table 2, Item 43) be populated for ETDs when no effective date is specified in the contract?
In line with the UK EMIR Validations Rules (applicable from 30 September 2024), the Effective Date field must be populated for all derivatives as it is a mandatory field. In situations where there is no effective date specified in a derivative contract, as may be the case for ETDs, the execution date should be provided in the Effective Date field.
When reporting at position level, the Effective Date field should be populated with the earliest effective date of the trades making up the position. If there is no effective date specified in the derivative contracts making up the position, the earliest execution date of the trades making up the position should be provided.
7.4 How should the Master Agreement Type field (Table 2, Item 34) be populated for ETDs not subject to a master agreement?
For the CCP to clearing member leg of an ETD, the Master Agreement Type field should be populated with 'OTHR' and the Other Master Agreement Type field (Table 2, Item 35) should be populated with 'CCPClearingConditions'.
For the clearing member to client leg of an ETD, the Master Agreement Type field should be populated with 'BIAG'.
7.5 How should the entity responsible for reporting report the Subsequent Position UTI field (Table 2, Item 4) when the subsequent position is an intraday ETD position with no UTI?
When the subsequent position is an intraday ETD position without a position UTI, the code 'NOTAVAILABLE' should be used in the Subsequent Position UTI field.
The 'NOTAVAILABLE' code should only be used where the subsequent position does not have a UTI. If the subsequent position is an intraday ETD position with a position UTI, that UTI should be reported.
See also question 10.1.
8. Margin and collateral
Collateral, or margin, is exchanged during a transaction to mitigate credit risk. Amendments to the UK EMIR reporting framework separates data on margin and collateral into a new table, including new fields for post-haircut margin values. This set of Q&As answers questions on how to report margin and collateral.
8.1 When populating the Initial and Variation Margin fields, should entities responsible for reporting report the amount of margin actually posted or received, or the amount of margin required pursuant to the margin requirements?
Entities responsible for reporting should populate the Initial Margin and Variation Margin fields with the amount of margin that was received or posted to meet the initial and variation margin requirements.
8.2 How should reporting entities identify excess collateral as opposed to initial and variation margin?
Initial margin, variation margin and excess collateral are defined by the purpose and timing in which they are posted:
- If margin is posted to meet an initial margin call, it should be reported as initial margin.
- If margin is posted to meet a variation margin call, it should be reported as variation margin.
- If collateral is posted for a reason separate and independent of initial and variation margin requirements it should be reported as excess collateral.
Where excess collateral has been reported, and subsequently an additional (variation or initial) margin call is made and met with that excess collateral, no change should be made to the reported posted collateral values.
We acknowledge that excess collateral, initial margin and variation margin will not always be segregated.
If margin posted to meet a combined initial and variation margin call is more than that requested, the additional margin posted should be allocated proportionally to the initial and variation margin initially requested.
As an illustration:
- A margin call of £120 is made, comprising £80 initial margin and £40 variation margin.
- In response, £126 of margin is posted. This should be reported as:
- initial margin £84
- variation margin £42
- excess collateral £0
8.3 How should variation margin be reported when it is posted and received on the same day?
When variation margin is posted and received on the same day and reported in a single report, the values should be netted so that the overall net margin (posted or received) that day is reported. If a report contains variation margin posted and received on the same day the UK EMIR Validations Rules (applicable from 30 September 2024) will cause it to be rejected.
If variation margin is posted or received in multiple currencies, it should be reported on a net basis and in a single currency. The reporting currency should be the one with the largest net contribution to the variation margin.
8.4 When a derivative trade is uncollateralised, what daily reports should be submitted by entities responsible for reporting?
Entities responsible for reporting have an obligation to submit daily valuation updates regardless of whether the derivative is collateralised or not.
Entities responsible for reporting should submit a margin update for every uncollateralised transaction. If subsequently, there is no change to the collateral data fields from the original margin update, daily margin updates do not need to be submitted for uncollateralised transactions. However, correction reports should still be submitted if applicable.
8.5 How should collateral be reported when a derivative trade has matured, expired or been terminated?
When a derivative trade has matured, expired or been terminated, reporting counterparties are not required to report any collateral amounts that have not yet been returned. Collateral remaining unreturned after a derivative trade has matured, expired or been terminated should not be reported, unless it is reported as part of a portfolio which contains outstanding trades as of the event date.
Collateral update reports may still be submitted for non-outstanding trades which were outstanding on the event date. Collateral update reports may be submitted for non-outstanding portfolios which were outstanding on the event date.
Collateral update reports should not be submitted for trades and portfolios which were not outstanding on the event date.
8.6 How should collateral be reported where a portfolio no longer contains any outstanding derivative trades?
Where a portfolio no longer contains any outstanding derivative trades, reporting counterparties are not required to report collateral amounts that have not been returned.
Collateral should only be reported for outstanding portfolios where there is at least one outstanding transaction (including where a position is flat).
Collateral update reports can be submitted for non-outstanding portfolios which were outstanding on the event date.
8.7 Should collateral which is not required to be exchanged be reported and, if so, how should it be reported?
Yes. In line with Article 6 of the UK EMIR Technical Standards on the Minimum Details of the Data to be Reported to Trade Repositories 2023, counterparties (excluding non-financial counterparties which do not exceed the clearing threshold) are required to report all posted and received collateral, regardless of whether that collateral is required to be received or posted. This includes where counterparties voluntarily collateralise transactions exempt from the margin requirements.
Initial or variation margin posted or received that exceed the required margins should be reported as part of the initial or variation margin posted or received. Any additional collateral posted or received independently of the initial and variation margins should be reported as excess collateral.
8.8 How should the Collateralisation Category field (Table 3, Item 11) be populated if the collateral exchanged at the time of reporting does not match what is stipulated in the collateral agreement?
The Collateralisation Category field should always reflect what is in the agreement between counterparties, irrespective of what collateral is exchanged in practice.
It is our expectation that any collateral exchanged should be consistent with the collateral agreement in place between the counterparties.
Nevertheless, the entity responsible for reporting should report the collateral that has been exchanged in practice in the initial and variation margin fields, even if it is contrary to the collateral agreement. In this case:
a. Where the collateral agreement states that margin should be exchanged, but margin is not exchanged, the relevant margin fields should be populated with zero and the associated currency fields with GBP.
b. Where the collateral agreement states that margin should not be exchanged, but margin is exchanged, the associated margin fields should be populated (unless the value is netted off).
8.9 How should the variation margin be reported when the Settle-to-Market model applies?
The net variation margin that is posted and collected that day should be reported in daily margin updates. This is not expected to be zero.
8.10 How should the Valuation Amount field (Table 2, Item 21) be reported when the Settle-to-Market model applies?
The daily change in valuation should be reported in daily valuation updates.
8.11 How should collateral be reported for uncleared derivatives where an entity responsible for reporting has multiple Credit Support Annexes (CSAs) under a single ISDA Master Agreement with a given counterparty?
For uncleared derivatives where there are multiple CSAs under a single ISDA Master Agreement, the Master Agreement Type field (Table 2, Item 34) in the transactions report should be populated with 'ISDA'.
Although more than one Collateral Portfolio Code (Table 3, Item 9) can be reported, to avoid the risk of reportable margin amounts being duplicated, an entity responsible for reporting must ensure the same initial or variation margin is only reported against a single Collateral Portfolio Code.
8.12 Can daily margin updates be submitted where the portfolio code contains special characters?
No. From 30 September 2024, all portfolio codes should not contain special characters. The UK EMIR Validation Rules (applicable from 30 September 2024) will not permit portfolio codes containing special characters.
8.13 Should contingent variation margin be reported?
No. As set out in Table 3 of the Technical Standards on the Minimum Details of the Data to be Reported to Trade Repositories 2023, contingent variation margin should not be included in calculations of variation margin.
9. Clearing
Clearing occurs when a CCP stands between two transacting counterparties to be the buyer to the seller, and the seller to the buyer. This set of Q&As provides guidance on populating fields related to clearing, such as the Clearing Obligation, Cleared and Clearing Member fields.
9.1 How should the Clearing Obligation field (Table 2, Item 30) be populated when a derivative trade is cleared at a CCP?
When an OTC derivative trade is cleared by a CCP, ie the CCP is a counterparty to the trade, it is no longer subject to the clearing obligation (UK EMIR, Article 4).
The Clearing Obligation field is then populated based on whether the derivative being cleared belongs to a class of OTC derivatives that has been declared subject to the clearing obligation as set out in the public register maintained by the Bank.
- Where the contract belongs to a class of OTC derivatives that has been declared subject to the clearing obligation, the Clearing Obligation field value should be reported as 'FLSE'.
- Where the derivative trade does not belong to a class of OTC derivatives that has been declared subject to the clearing obligation, the Clearing Obligation field should be reported as 'UKWN'.
9.2 How should a trade that is subject to the clearing obligation but not yet cleared be reported?
In line with the requirements of the clearing obligation (UK EMIR, Article 4), our expectation is that any trade which is subject to the clearing obligation will be cleared. Once a trade is cleared, it should then be reported with Cleared field (Table 2, Item 31) as 'Y' and the Clearing Obligation field (Table 2, Item 30) as 'FLSE', as set out in Question 9.1.
If a trade has not yet been entered into clearing with a CCP by close of business the Cleared field should be reported ‘N’ and the Clearing Obligation field should be reported as 'TRUE'.
Once the trade has been entered into clearing with a CCP, another report should be submitted, with action type Terminate, event type Clearing with the Cleared field not reported. The Clearing Obligation field remains 'TRUE' for the terminated, or alpha, trade.
9.3 How should the Clearing Obligation field (Table 2, Item 30) be populated when a non-financial counterparty (NFC) chooses to clear all trades instead of performing the clearing threshold calculation?
An NFC performs a clearing threshold calculation to determine if it is subject to the clearing obligation (see Article 10 of UK EMIR). The threshold levels are different depending on the asset class. If an NFC finds that it is below the clearing threshold in the asset class relevant to that transaction or position, it is not subject to the clearing obligation. In this scenario, for OTC derivatives it reports:
- 'FLSE' if the contract belongs to a class of OTC derivatives that has been declared subject to the clearing obligation
- 'UKWN' if the contract does not belong to a class of OTC derivatives that has been declared subject to the clearing obligation
If an NFC does not perform the clearing obligation threshold calculation it will be deemed to be subject to the clearing obligation. In this scenario, NFCs should populate the Clearing Obligation field as set out in questions 9.1 and 9.2.
9.4 How should the Clearing Member field (Table 1, Item 16) be populated when a CCP temporarily assumes both sides of a derivatives contract following a clearing member default?
When a clearing member defaults, and a CCP temporarily assumes both sides of a contract, where the UTI is unchanged, the Clearing Member field should continue to be populated with the original clearing member until the transaction is terminated, matures, expires or the CCP transfers the transaction to another clearing member.
If a temporary contract with a new UTI is created where the CCP assumes both sides of a contract, the prior UTI field (Table 2, Item 3) should be populated with the previous UTI. If a CCP transfers the derivative trade to another clearing member, where feasible the Prior UTI field (Table 2, Item 3) should be populated by the CCP with the UTI of the predecessor transaction. See question 10.5 for more details.
10. Position level reporting
As described in Article 5 of the UK EMIR Technical Standards on the Minimum Details of the Data to be Reported to Trade Repositories 2023, a counterparty can report many outstanding derivatives together as a position, dependent on certain conditions. This set of Q&As provide further guidance for this activity.
10.1 How should positions be reported when opened and closed on the same day?
The position should not be reported in this scenario. However, the underlying transactions must still be reported. The Subsequent Position UTI field (Table 2, Item 4) should be populated with the position UTI even though the position itself is not reported.
When the subsequent position does not have a UTI (for example, an intraday ETD position without a position UTI), the code 'NOTAVAILABLE' should be used in the Subsequent Position UTI field. If a position is subsequently opened and a position UTI made available, the Subsequent Position UTI field should be updated to reflect this as soon as possible. In this circumstance there is no requirement to resubmit previous reports to retrospectively include the Subsequent Position UTI.
10.2 How should an open position be reported when netted to zero due to new or changed underlying transactions?
If the position is netted to zero temporarily due to changes in the underlying transactions, the position should continue to be reported daily.
If the position is netted to zero due to an account closure, the position should be terminated. If a terminated position is subsequently reopened, the position should be reported with a new UTI.
10.3 How should the Execution Timestamp field (Table 2, Item 42) be modified for positions netted to zero that are subsequently reopened?
If a position was netted to zero and reported each day as zero, the Execution Timestamp field should maintain the original value and not be modified.
If a position that was netted to zero and terminated is subsequently re-opened, the Execution Timestamp field should be populated with the time the position was re-opened.
10.4 What event types are permitted when a new position is made due to multiple events on the same day?
The event type should be populated with the type of the first event that creates the position. Step-in, Inclusion in Position and Corporate Event are the permitted event types for new positions.
10.5 How should the Prior UTI field (Table 2, Item 3) be populated in the event of a position transfer?
The Prior UTI of a report describing a new position following a position transfer should be populated with the UTI of the original position (the position the transfer came from).
Our expectation is that each entity responsible for reporting will make all reasonable efforts to populate this correctly. Where this is not possible, the field may initially be populated with the code ‘NOTAVAILABLE’ and then amended as soon as practicable once the correct Prior UTI value becomes available. In this circumstance there is no requirement to resubmit previous reports to retrospectively include the Prior UTI.
10.6 How should the event of 2 positions merging be reported?
In a scenario where 2 positions have merged, 1 position continues and the other terminates. Both counterparties must agree which position continues and which terminates.
This event does not change the Prior UTI or UTI of the continuing position. The terminating position should be reported with an action type ‘Terminate’ and event type 'Inclusion in position'.
10.7 How should the Option Premium Amount field (Table 2, Item 139) be populated in position level reports?
The Option Premium Amount field should be populated with '0' in position level reports.
Alternative reporting methodologies, such as one based on the sum of the options’ premiums, would not provide meaningful interpretation. Therefore, the field must be populated with '0'.
10.8 How should the Option Premium Payment Date field (Table 2, Item 141) be populated for a position where the derivative trades underlying the position have different option premium payment dates?
The entity responsible for reporting should populate the Option Premium Payment Date field with the earliest option premium payment date of the trades underlying the position.
10.9 Can spread bets be reported at position level (ie not as individual transactions) after first being reported at trade level?
Yes. Spread bets can initially be reported with the action type POSC before being aggregated and re-reported at position level. This is provided that the conditions in Article 5 of the Technical Standards on the Minimum Details of the Data to be Reported to Trade Repositories are met.
11. Asset class and product specific
This section contains Q&As specific to derivative asset classes and certain derivative products.
11.1 How should package transactions, which include transactions not subject to the UK EMIR reporting obligations (eg FX spot transactions), be reported?
Only transactions subject to the UK EMIR reporting obligations need to be reported. If a package contains transactions which are not required to be reported under UK EMIR, only the transactions in the package subject to the UK EMIR reporting obligations must be reported.
However, for transactions that are reported as part of a package, all package transaction related fields should be populated with details applicable to the whole package, including both reportable and non-reportable transactions. For example, the Package Transaction Price field (Table 2, Item 53) should be populated with the traded price for the entire package in which the reported derivative is a component, including transactions which are part of the package but not required to be reported under UK EMIR.
11.2 How should the payer and receiver be reported for FX non-deliverable forwards where this is not known at the time of reporting?
In circumstances where the payer and receiver are not known at the point of reporting, the counterparty receiving the currency which appears first when sorted alphabetically by ISO 4217 standard should be identified as the receiver for leg 1 and the payer for leg 2. The counterparty delivering the currency should be identified as the payer for leg 1 and the receiver for leg 2.
11.3 How should the Derivative Based on Cryptoassets field (Table 2, Item 12) be populated?
A cryptoasset is any cryptographically secured digital representation of value or contractual rights that can be transferred, stored or traded electronically, and that uses technology supporting the recording or storage of data. This is in line with the definition in section 471(1) of the Financial Services and Markets Act 2000.
Where a derivative is based on an underlying meeting this definition, the Derivative Based on Cryptoassets field should be populated with 'True'. Otherwise, it should be populated with 'False'.
Noting that the regulatory regime for cryptoassets is developing, the Authorities will monitor regulatory developments and consider if further guidance is needed.
11.4 What asset class should derivatives based on cryptoassets be reported as?
Derivatives based on cryptoassets should be reported under the asset class of the cryptoasset they are based on. For example, derivatives based on security tokens akin to traditional shares (see the FCA’s Guidance on Cryptoassets (PS19/22)) would be reported as equity derivatives. Derivatives not clearly falling into one of the specified asset classes should be reported under the asset class most closely resembling the derivative. Derivatives based on cryptoassets should not, however, be reported under the currency asset class, since cryptoassets don’t have an ISO 4217 currency code required for currency derivatives.
Derivatives based on unregulated exchange tokens that don’t clearly fall into one of the specified asset classes, such as Bitcoin and Ether, should be reported under the commodity asset class. This is the asset class that most closely resembles these derivatives.
Noting that the regulatory regime for cryptoassets is developing, the Authorities will monitor regulatory developments and consider if further guidance is needed.
11.5 How should commodity swaps referencing 2 underlying commodities be reported?
The UK EMIR Validation Rules (applicable from 30 September 2024) do not permit derivatives to be reported with 2 underlying commodities. Commodity swaps referencing 2 commodities should be reported as package transactions made up of 2 commodity forwards linked via a package identifier.
The Price (Table 2, Item 48) and Package Transaction Price (Table 2, Item 53) fields are mandatory for commodity forwards with a package identifier, but commodity swaps may not have a price at execution. When reporting a commodity swap as a package transaction made up of 2 commodity forwards, these fields should be populated with the default value '999999999999999999' (for monetary values) or '99999999999' (for percentage values) and updated once the price is available.
When reporting commodity swaps as 2 commodity forwards linked via a package identifier, reporting counterparties should provide valuations for both forwards even if there may only be a single valuation for the whole commodity swap. In this scenario, the Valuation Amount (Table 2, Item 21) field for both forwards should be populated with the valuation of the whole commodity swap.
11.6 Should the Spread of Leg 1 (Table 2, Item 93) and Spread of Leg 2 (Table 2, Item 109) fields be populated for swaps in asset classes other than interest rates?
Yes, where a spread is present it should be reported for all asset classes.